An introduction to PyObjC

Contents

Preface
First Steps
Objective-C for PyObjC users
Overview of the bridge
Accessing Python objects from Objective-C
Cocoa for Python programmers
Notes on specific tasks
Building applications
- "py2app" : setup.py
- "IDE approach" : Xcode

Preface

PyObjC is a bridge between Python and Objective-C. It allows Python scripts to use and extend existing Objective-C class libraries; most importantly the Cocoa libraries by Apple.

This document describes how to use Objective-C class libraries from Python scripts and how to interpret the documentation of those libraries from the point of view of a Python programmer.

When dealing with the Objective-C runtime, there are certain patterns you need to learn when writing Python code. If you're not already an Objective-C programmer, some of them will seem strange or even "un-pythonic" at first. However, you will get used to it, and the way that PyObjC works is quite compliant with the Zen of Python (import this). In fact, Ronald is Dutch ;)

With no further ado, here are the three most important things you must know before embarking on any PyObjC voyage:

Underscores, and lots of them

Objective-C objects communicate with each other by sending messages. The syntax for messages is somewhere in-between Python's positional and keyword arguments. Specificlaly, Objective-C message dispatch uses positional arguments, but parts of the message name (called "selector" in Objective-C terminology) are interleaved with the arguments.

An Objective-C message looks like this:

[someObject doSomething:arg1 withSomethingElse:arg2];

The selector (message name) for the above snippet is this (note the colons):

doSomething:withSomethingElse:

In order to have a lossless and unambiguous translation between Objective-C messages and Python methods, the Python method name equivalent is simply the selector with colons replaced by underscores. Since each colon in an Objective-C selector is a placeholder for an argument, the number of underscores in the PyObjC-ified method name is the number of arguments that should be given.

The PyObjC translation of the above selector is (note the underscores):

doSomething_withSomethingElse_

The message dispatch, translated to PyObjC, looks like this:

someObject.doSomething_withSomethingElse_(arg1, arg2)

Methods that take one argument will have a trailing underscore.

It may take a little while to get used to, but PyObjC does not ever rename selectors. The trailing underscore will seem strange at first, especially for cases like this:

# note the trailing underscore
someObject.setValue_(aValue)

There are a few additional rules regarding message dispatch, see the Overview of the bridge for the complete rundown.

Two-phase instantiation

Objective-C, being a low-level runtime, separates the two concepts required to instantiate an object.

allocation:: Reserve a chunk of memory large enough to hold the new object, and make sure that all of its declared instance variables are set to "zero" (this means nil pointers to objects, 0 for integers, etc.).
initialization:: Fill in the blank slate allocated by the allocation phase.

In Objective-C, the convention is for allocation to be performed by a class method called alloc, and initialization is done with method beginning with the word init. For example, here is the syntax for instantiating an NSObject:

myObject = NSObject.alloc().init()

And here is an example for creating an NSData instance given a few bytes:

myData = NSData.alloc().initWithBytes_length_('the bytes', 9)

You must also follow this convention when subclassing Objective-C classes. When initializing, an object must always (directly or indirectly) call the designated initializer of its super. The designated initializer is the "most basic" initializer through which all initialization eventually ends up. The designated initializer for NSObject is init. To find the designated initializer for other classes, consult the documentation for that class. Here is an example of an NSObject subclass with a customized initialization phase:

class MyClass(NSObject):

    def init(self):
        """
        Designated initializer for MyClass
        """
        # ALWAYS call the super's designated initializer.
        # Also, make sure to re-bind "self" just in case it
        # returns something else, or even None!
        self = super(MyClass, self).init()
        if self is None: return None

        self.myVariable = 10

        # Unlike Python's __init__, initializers MUST return self,
        # because they are allowed to return any object!
        return self

class MyOtherClass(MyClass):

    def initWithOtherVariable_(self, otherVariable):
        """
        Designated initializer for MyOtherClass
        """
        self = super(MyOtherClass, self).init()
        if self is None: return None

        self.otherVariable = otherVariable
        return self

myInstance = MyClass.alloc().init()
myOtherInstance = MyOtherClass.alloc().initWithOtherVariable_(20)

Many Objective-C classes provide class methods that perform two-phase instantiation for you in one step. Several examples of this are:

# This is equivalent to:
#
#   myObject = NSObject.alloc().init()
#
myObject = NSObject.new()

# This is equivalent to:
#
#   myDict = NSDictionary.alloc().init()
#
myDict = NSDictionary.dictionary()

# This is equivalent to:
#
#   myString = NSString.alloc().initWithString_(u'my string')
#
myString = NSString.stringWithString_(u'my string')

Objective-C uses accessors everywhere

Unlike Python, Objective-C convention says to use accessors rather than directly accessing instance variables of other objects. This means that in order to access an instance variable value of an object valueContainer you will have to use the following syntax:

# Getting
#
# notice the method call
#
myValue = valueContainer.value()

# Setting
#
# notice the naming convention and trailing underscore
#
valueContainer.setValue_(myNewValue)

When writing your own classes from Python, this is a bit harder since Python only has one namespace for all attributes, even methods. If you choose to implement accessors from Python, then you will have to name the instance variable something else:

class MyValueHolder(NSObject):

    def initWithValue_(self, value):
        self = super(MyValueHolder, self).init()
        # It's recommended not to use typical Python convention here,
        # as instance variables prefixed with underscores are reserved
        # by the Objective-C runtime.  It still works if you use
        # underscores, however.
        self.ivar_value = value
        return self

    def value(self):
        return self.ivar_value

    def setValue_(self, value):
        self.ivar_value = value

It's also possible to use Key-Value Coding in some cases, which eliminates the need for writing most accessors, but only in scenarios where the rest of the code is using it.

Objective-C for PyObjC users

It is recommended that you take the time to understand a little bit about Objective-C before jumping into PyObjC development. The class libraries that you will be using from Cocoa are not documented in Python, and their documentation will be confusing without a grasp on the semantics and syntax of Objective-C.

Objective-C is an object-oriented programming language implemented as a superset of C that borrows heavily in concept and syntax from Smalltalk. of C and borrows heavily from Smalltalk. It features single inheritance with dynamic dispatch and (in theory) multiple root classes. This is basically the same as Python with single inheritance.

An important difference between Python and Objective-C is that the latter is not a pure object-oriented language. Some values are not objects, but values of plain C types, such as int and double. These basic C types can be used as the types of arguments and the return value of methods.

Object allocation and initialization are explicit and separate actions in Objective-C. The former is done by the class-method alloc, while the latter is done by instance methods whose name customarily starts with init.

Objective-C code looks just like plain C code, with some easily recognizable Smalltalk-like extensions for the object-oriented parts of the language. An example class declaration (usually found in .h files) and implementation (usually found in .m files) are listed below. Class declarations are easily recognized as blocks of code between @interface and @end, and similarly the implementation is between @implementation and @end. An expression enclosed in brackets in Objective-C is called a message, and is the equivalent to an instance method invocation in Python. For example, this Objective-C code:

[aMutableArray addObject:@"constant string"];

Is equivalent in intent to the following in Python:

aList.append(u"constant string")

Objective-C messages have three components: a target, a selector, and zero or more arguments. The target, aMutableArray, is the object or class receiving the message. The selector, addObject: uniquely identifies the kind of message that is being sent. Finally, the arguments, @"constant string" are used by the implementation of the method upon receipt of the message. The syntax of Objective-C message dispatch is deceptively similar to keyword arguments in Python, but they are actually quite different. Objective-C messages can not have default arguments, and all arguments are passed in a specific order. The components of a selector may not be reordered. Syntactically, one argument must be interleaved at every colon in the selector. The message:

[anArray indexOfObject:someObject inRange:someRange]

Target:: anArray
Selector:: indexOfObject:inRange:
Arguments:: someObject, someRange

As documented later, the straightforward translation of such a message to Python is:

anArray.indexOfObject_inRange_(someObject, someRange)

This may be awkward and "unpythonic" at first, however this syntax is necessary to preserve the semantics of Objective-C message dispatch.

A class declaration:

@interface MyClass : MySuperClass
{
    id  anInstanceVariable;
    int anotherInstanceVariable;
}

// A class method that returns an initialized instance of this class.
// Similar to an implementation of __call__ on the metaclass.
+instanceWithObject:(id)anObject andInteger:(int)anInteger;

// An instance method, the designated initializer for MyClass.
// Similar to an implementation of __new__ on MyClass.
-initWithObject:(id)anObject andInteger:(int)anInteger;

// An accessor, instance variables (attributes) are in a separate
// namespace and are considered "private" in Objective-C.  Conventionally,
// there is nothing similar to this in Python.
-(int)anotherInstanceVariable;
@end

A class implementation:

@implementation MyClass

// Note that a type is not declared for the return value.  Undeclared types
// are assumed to be "id", which means any kind of instance.
+instanceWithObject:(id)anObject andInteger:(int)anInteger
{
    // 1. Create an instance of MyClass.
    // 2. Initialize it with its designated initializer
    //    "initWithObject:andInteger:".
    // 3. Autorelease it, so that it does not leak memory.
    // 4. Return the new instance.
    //
    // NOTE:
    //   By convention,initializers (such as +new, -init, -copy)
    //   are the only methods that should return retained objects.
    //
    // NOTE:
    //   Since this is a class method, "self" refers to the class!
    //
    // Very roughly similar to:
    //   return self.__new__(anObject, anInteger)
    return [[[self alloc] initWithObject:anObject andInteger:anInteger] autorelease];
}

// Note that a type is not declared for the return value.  Undeclared types
// are assumed to be "id", which means any kind of instance.
-initWithObject:(id)anObject andInteger:(int)anInteger
{
    // Call the designated initializer of the superclass.
    // Similar to:
    //     self = super(MyClass, self).__new__()
    self = [super init];

    // Bail if initialization of the superclass failed.
    // Similar to:
    //     if self is None:
    //         return None
    if (!self) {
        return nil;
    }

    // Set the instance variable (attribute).  The argument must be
    // retained, since it will persist as long as the instance does.
    // Similar to:
    //     # Reference counting is automatic in Python
    //     self.anInstanceVariable = anObject
    anInstanceVariable = [anObject retain];

    // Set the other instance variable.  Note that since anInteger is
    // a primitive "C" type, not an object, no reference counting takes
    // place.
    // Similar to:
    //     # Everything is an object in Python
    //     self.anotherInstanceVariable = anInteger
    anotherInstanceVariable = anInteger;

    // Like __new__ in Python, initializers in Objective-C must
    // explicitly return self.  Note that this is different from
    // __init__.
    // Similar to:
    //     return self
    return self;
}
    

// an accessor, instance variables (attributes) are in a separate
// namespace and are considered "private"
-(int)anotherInstanceVariable
{
    return anotherInstanceVariable;
}

// Since objects were retained as instance variables on this object,
// they must be freed when the object is.  This is similar to an
// implementation of __del__ in Python.  Since Objective-C has no
// cyclic garbage collection, this isn't discouraged like it is in
// Python.
-(void)dealloc
{
    // Very roughly similar to:
    //     del self.instanceVariable
    [instanceVariable release];

    // Very roughly similar to:
    //     super(MyClass, self).__del__()
    [super dealloc];
}

@end

Objective-C also features exceptions, but they are typically only used for disaster recovery, not error handling, so you will not encounter them very often. Read The Objective-C Programming Language if you want to know more about exceptions in Objective-C.

One thing to keep in mind when translating Objective-C snippets to Python is that any message can be sent to nil, and the return value of that message will be nil. PyObjC translates nil to None when crossing the bridge, so any such attempt will raise an AttributeError.

For more information about Objective-C see:

The Objective-C Programming Language at Apple.

Overview of the bridge

Classes

Objective-C classes are visible as (new-style) Python classes and can be subclassed just like normal Python classes. All the usual introspection mechanisms work as well, as do __slots__ and descriptors. The major differences between normal Python classes and Objective-C classes are the way that instances are created and initialized, and the fact that Objective-C selectors look strange when translated to Python methods.

Multiple inheritance may be used when subclassing an Objective-C class, so long as the Objective-C class is the first base class and there is only one Objective-C base class. The Objective-C runtime does not support multiple inheritance. These mix-in classes should not contain different implementations for Objective-C methods. To achieve this behavior, Categories should be used instead.

Another thing to keep in mind is that the names of Objective-C classes must be globally unique per process, including across Python modules. That is, it is not possible to have two Python modules that define a class with the same name. It is conventional to choose class names with a short prefix that uniquely identify your project or company. For example, Apple uses NS as the prefix for all classes in the Cocoa libraries. Note that the NS prefix made much more sense when it was called NeXTstep, but persists to this day for compatibility reasons.

As described in Objective-C for PyObjC users the creation of Objective-C objects is a two-stage process. To initialize objects, first call a class method to allocate the memory (typically alloc), and then call an initializer (typically starts with init). Some classes have class methods which perform this behind the scenes, especially classes that create cached, immutable, or singleton instances.

Messages and Functions

Objective-C methods are bridged to Python methods. Because Objective-C message dispatch syntax can not be translated directly to Python, a few simple translations must take place. The rules for these translations are:

Replace all colons in the selector with underscores:
- someMethod:withFoo:andBar: translates to someMethod_withFoo_andBar_
If the result class or raise (Python keywords), append two underscores:
- class translates to class__
- raise translates to raise__
Use this translated selector as a normal Python method. The arguments must be passed in the same order, and the number of arguments passed will normally be equal to the number of underscores in the method name; exceptions to this rule and the behavior of "result" are mentioned below.
- result = [someObject someMethod:firstArg withFoo:foo andBar:bar]; translates to result = someObject.someMethod_withFoo_andBar_(firstArg, foo, bar)

Note that it is currently not possible to support methods with a variable number of arguments from Python. These selectors must be wrapped by custom Objective-C code in order to be accessible by Python.

Wrapped/bridged methods (and functions) have the same number of arguments as the corresponding Objective-C method or function, unless otherwise noted in the documentation (Notes on supported APIs and classes on Mac OS X for Cocoa on Mac OS X).

Most methods or functions that take or return pointers to values will be an exception to this rule if it is callable from Python at all. In Objective-C terminology, there are three kinds of pointers that can be used in a method:

in:: Used to pass data by reference to the function. This is not a special case from Python.
out:: Used to pass data from the function (e.g. an additional return value). From Python, these values will be missing from the argument list (there will be more underscores than arguments passed). See below for notes on how out arguments change the return value.
inout:: A combination of in and out (a value is passed by reference, and mutated upon return). Unlike out, these arguments remain in the argument list, and thus do not have an effect on the number of arguments a method expects. See below for notes on how inout arguments change the return value.

In order to determine what the return value of such an exceptional message will look like, you must "make a list" of the return values with the following rules:

If the return type of the method or function is not void, add it to the list.
For each argument in the method or function, add it to the list if it is out or inout.

After creating this list, you will have one of three cases:

Empty:: The return value of this call will always be None.
One element:: The return value of this call will correspond to the one element of the list.
More than one element:: The return value of this call will be a tuple in the same order as the list.

The rules for pass by reference arguments may look quite complicated, but it turns out this is very straightforward when working with them.

As an example of a method with two output arguments, NSMatrix implements a selector named getNumberOfRows:columns: with the following signature:

(void)getNumberOfRows:(int *)rowCount columns:(int *)columnCount

This method is used from Python like this:

rowCount, columnCount = matrix.getNumberOfRows_columns_()

When a function or method has an array of values and the length of that array as arguments, None may be passed as the length to specify that the length of the given sequence should be used.

Python's array.array type may be used to represent a C array if the typestr and size match what is expected by the selector. Numeric, numarray, and other third party array types are not supported in PyObjC 1.3.5.

When defining methods in an Objective-C subclass, the bridge must provide type signatures for each method to the Objective-C runtime. The default type signature is for all arguments as well as the return value to be objects (just like with normal Python methods). If there is no return statement in the implementation, then the return value will be void. The bridge will automatically pick a better signature when it has more information available. Specifically, a method overrides an existing method, the bridge will assume you want to use the same method signature. Furthermore, if the method is implemented in an (informal) protocol known to the bridge it will use the signature from the corresponding method in that signature.

The end result is that it is rarely necessary to explicitly add information about the signature of methods. For the two most common cases where this is necessary, we have provided convenience decorators (used like staticmethod or classmethod):

objc.accessor:: Use this to wrap a Key-Value Coding or Key-Value Observing compliant accessor.
PyObjCTools.AppHelper.endSheetMethod:: Use this to wrap the implementation of a sheet's "didEndSelector" callback.

For complete control of the mapping to Objective-C you can use the function objc.selector to create custom descriptors. See the documentation of the objc module for the arguments you can use with this function. It is normally used like this:

class MyObject(NSObject):

        # -(void)someMethod:(float)arg
        def someMethod_(self, arg):
                pass

        someMethod_ = objc.selector(someMethod_, signature='v@:f')

From Python 2.4, there is a decorator for this purpose:

class MyObject(NSObject):

        @objc.signature('v@:f')
        def someMethod_(self, arg):
                pass

Reference counting

The Cocoa libraries, and most (if not all) other class libraries for Objective-C use explicit reference counting to manage memory. The methods retain, release and autorelease are used to manage these reference counts. You won't have to manage reference counts in Python, the bridge does all that work for you (but see Notes on supported APIs and classes on Mac OS X for some advanced issues).

The only reasons reference counts are mentioned at all are to tell you about ignoring them, and more importantly to introduce you to some issues w.r.t. reference counting.

It turns out that Cocoa uses a primitive form of weak references. Those are not true weak references as in Python, but use-cases where an object stores a reference to another object without increasing the reference count for that other object. The bridge cannot solve the issues this introduces for you, which means that you get hard crashes when you're not careful when dealing with those weak references.

The basic rule to deal with weak references is: make sure objects stays alive as long as someone might have a weak reference to them. Due to the way the bridge works, this means that you must make sure that you don't create weak references from Objective-C to a plain Python object. The Python object stays alive, but the proxy object as seen by the Objective-C code is actually an autoreleased object that will be cleaned up unless the Objective-C code increases its reference count.

The document Notes on supported APIs and classes on Mac OS X contains information about classes that work with weak references. The most important are notification centers and NSOutlineView, to be exact: the outline view stores weak references to the objects return by the method outlineView:child:ofItem: of its data source. The easiest way to avoid crashes with outline views is to make sure that you model for the view uses subclasses of NSObject to represent the nodes in the outline view.

Another gotcha is that obj.setDelegate_() often does not retain the delegate, so a reference should be maintained elsewhere.

Protocols

Cocoa defines a number of formal and informal protocols that specify methods that should be implemented by a class if it is to be used in a specific role, such as the data source for an NSTableView.

Those protocols are represented by instances of objc.informal_protocol, and objc.formal_protocol. The only ones that have to care about these objects are the maintainers of wrappers around Objective-C frameworks: they have to keep these protocol wrappers up-to-date.

PyObjC will automatically use the information in the informal_protocol objects to add the right method signatures to methods, and to warn about classes that partially implement a protocol.

See PyObjC protocol support for more information.

Cocoa Bindings

In Mac OS X 10.3 Apple introduced Cocoa Bindings, a method to make it easier to create and use Controller objects using Key-Value Observing and Key-Value Coding. In order to create accessors compatible with this, you must use objc.accessor to create an appropriate selector descriptor.

PyObjC automaticly emits the right Key-Value Observing notifications when you set attributes on an Objective-C class. This is however not supported for pure python objects. You should therefore use NSMutableArray instances instead of Python lists for instance variables that will be observed and contain a sequence of values (and simularly for NSMutableDictionary instead of dict).

Accessing Python objects from Objective-C

All Python objects can be accessed from Objective-C through proxy objects. Whenever a Python object crosses the line from Python to Objective-C a proxy object is created (of class OC_PythonObject, a subclass of NSProxy). This proxy object will forward all method calls from Objective-C to Python, and will return the results back to Objective-C.

See the section 'Method protocol' for a description of how PyObjC translates between Python and Objective-C method calls.

A number of Python types/classes are treated specially:

Python numbers (int, float, long) are translated into NSNumber instances. Their identity is not preserved across the bridge.
Python str is proxied using OC_PythonString, a subclass of NSString. A Python str may be used anywhere a NSString is expected, but unicode should be used whenever possible. OC_PythonString will use the default encoding of NSString, which is normally MacRoman but could be something else.
Python unicode is proxied using OC_PythonUnicode, a subclass of NSString. A Python unicode may be used anywhere a NSString is expected.
Python dict is proxied using OC_PythonDictionary, a subclass of NSMutableDictionary. A Python dict may be used anywhere an NSDictionary is expected.
Python list and tuple are proxied using OC_PythonArray, a subclass of NSMutableArray. Python list or tuple objects may be used anywhere an NSArray is expected.
Python objects that implement the Python buffer API, except for str and unicode, are proxied using OC_PythonData, a NSData subclass. Objects that implement the Python buffer API such as buffer, array.array, mmap.mmap, etc. may be used anywhere a NSData is expected.

These special cases allow for more transparent bridging between Python and Objective-C.

Cocoa for Python programmers

Cocoa frameworks are mapped onto Python packages with the same name; that is the classes, constants and functions from the AppKit framework are available after you import AppKit in your Python script.

These helper modules contain only functions, constants and classes that wrap items in the corresponding framework. All utility functions and classes are located in the PyObjCTools package and objc module. Note that it is possible to use pydoc (or the help()) function with the framework wrappers, but that this is not very useful for the entire module due to the size of these modules.

This makes it easier to find documentation for an item: if you import it from the wrapper module for an Objective-C framework the documentation for that item can be found in the documentation for the framework; otherwise the item is documented in the PyObjC documentation.

The module PyObjCTools.NibClassBuilder can be used to make working with NIB files more convenient. This module can be used to extract information about classes from NIB files, both as a standalone tool generating source code and during runtime. See the online documentation for this module for more information.

PyObjC includes a number of examples that show how to use Cocoa from Python. The PyObjC Example index contains an overview of those examples.

More information on Cocoa programming can be found at:

Cocoa documentation at the Apple developer website
Cocoa examples at the Apple developer website
stepwise.com
Your local bookstore or library

Notes on specific tasks

Working with threads

Most of Cocoa, and thus PyObjC, requires an NSAutoreleasePool in order to function properly. PyObjC does this automatically on the first thread it is imported from, but other threads will require explicit NSAutoreleasePool management. The following practice for working with NSAutoreleasePool is recommended:

pool = NSAutoreleasePool.alloc().init()
...
del pool

Typically this will be done at the beginning and end of the thread. It is important to use del before rebinding the pool local to another NSAutoreleasePool instance, otherwise it will not have the intended effect.

For long running threads and tight loops, it can also be useful to use this pattern in the body of the loop in order to optimize memory usage. For example, NSRunLoop will be create a new NSAutoreleasePool at the beginning of each run loop iteration and release it at the end.

Finalizers

In normal Python, there are two methods for writing finalizers: implementing __del__, and using weakref.ref callbacks. Generally, __del___ is discouraged as it does not allow the object to participate in cyclic garbage collection and create uncollectible garbage if not implemented properly. weakref.ref callbacks avoid this restriction as they do not provide a real reference to the object.

In Objective-C, there is no cyclic garbage collection, so all Objective-C objects (including subclasses from Python) are already subject to these restrictions. When subclassing an Objective-C class, you may implement dealloc or __del__. If you implement dealloc, ensure that you call the super dealloc at the end. If you implement both __del__ and dealloc, the order in which they are called is undefined.

It is not currently possible to create a weakref.ref for any Objective-C object. It is probably technically possible to do, but tricky, so it may eventually be implemented in a future version of PyObjC (especially if a future Objective-C runtime supports it).

Copying

It is possible for a Python subclass of an Objective-C class to implement the NSCopying protocol. Some care must be taken when the superclass already implements the protocol.

Some NSCopying compliant Objective-C classes copy the template object manually. In those cases the Python subclass must also copy the additional ivars manually.

Other NSCopying compliant Objective-C classes use a convenience function that creates a shallow copy of the object and all of its ivars. In those cases the Python subclass will not have to explicitly copy all of the ivars. However, the ivars in the copy will refer to the same objects as the original, and will thus share some state. As with shallow copies in Python, if any of the ivars refer to mutable objects (list, dict, etc.) it may be desirable to explicitly make shallow or deep copies of the mutable ivars.

NOTE: PyObjC might introduce a helper class when you inherit from a class that implements NSCopying as an internal implementation detail. External code should not rely on the existance of this class.

NOTE2: SomeClass.copyWithZone_ should not be implemented unless a superclass already implements copyWithZone:, or else the behavior will be undefined (memory corruption, crashes, etc.).

Building applications

There are two different recommended ways to build applications with PyObjC.

"py2app" : setup.py

The PyObjC installer includes a copy of the py2app package. This package offers a way to build distutils scripts for building (standalone) applications and plugin bundles.

An example setup.py script:

from distutils.core import setup
import py2app

setup(
    app = ["iClass.py"],
    data_files = ["English.lproj"],
)

During development you typically invoke it from the command line like this:

python setup.py py2app -A

This will build an application bundle in a folder named dist in the current folder. The -A option tells py2app to add symbolic links for data folders and files and an Alias to your main script, allowing you quickly rebuild the application without doing a full dependency scan, with the additional bonus that you can edit them without rebuild. To build a standalone application, simply do not use the -A option. Note that if you are using a version of Python shipped with your operating system, it will not be included in the application. Otherwise, your application will include stripped down version of the Python runtime that you ran setup.py with.

For more information about py2app usage, read through some of the setup.py scripts used by the examples in the Examples folder. On any setup.py script that imports py2app, you can use the following command to see the list of options:

python setup.py py2app --help

"IDE approach" : Xcode

PyObjC includes a number of Xcode templates that can be used to develop applications, using the same underlying functionality that is in py2app. These templates are used like any other Xcode template, but there are some organizational rules about the template.

See the documentation for the templates for more details.